ＦＤ１枚のみの出品です。
定形外郵便・１１０円で送ります。
以下に、README の先頭部分を転記します。
「*****************************************************************************
1. Updating your system BIOS by PFLASH.EXE
***********************************************************************
* Warning ! *
* 1. Flash EPROM provides you a convenient way to update your *
* system BIOS, please note that updating your system BIOS *
* is serious, only update when you need to do it. Un-necessary *
* updating cause malfunction of the system are not cover *
* within the warranty. *
* 2. If you write something wrong to your FLASH EPROM, system *
* may not boot anymore, please refer to the manual carefully *
* to make sure you follow the correct step in updating, or *
* ask qualify technician and/or call your dealer for help. *
***********************************************************************
(1) Make sure the FLASH Read/Write jumper of M/B is correct. If the
setting is incorrect, the Flash EPROM won't be programed. Please
refer to the manual to set it respectfully.
(2) Boot your system from MS-DOS system diskette which contains no
CONFIG.SYS and AUTOEXEC.BAT files.
Note: FLASH.EXE can't work under protected mode/virtual mode.
Memory manager like QEMM386, EMM386, 386MAX should not be
loaded.
(3) Type "PFLASH", then press "ENTER".
(4) To support "Plug&Play" BIOS Programming, you require "Block Mode"
type FLASH EPROM. The PFLASH.EXE can support SST 5 Volt FLASH
EPROM(PH29EE010) and Intel 12Volt Boot Block FLASH EPROM (P28F001
BX-T) only. Do not continue to program FLASH EPROM if the FLASH
type is "UNKNOWN".
・・・」
;)
