!
! Furukawa FITELnet F220
! S/N : 00017282
!
! * Factory default
! * Login ID : operator
! * No password
!
INIT: version 2.88 booting
mount: /proc: can't find in /etc/fstab.
Checking all filesystems...
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting udev
Checking root filesystem /dev/mmcblk0p2...
(none)
Configuring packages on first boot....
INIT: Entering runlevel: 5nutes. Please
starting equipment..
factory-default success.
.
.
Configuring network interfaces... done.
Starting system message bus: dbus.
Mounting cgroups...Done
chmod /equipment and /drive...
Starting AppArmor profiles
Mounting securityfs on /sys/kernel/security
find: '/etc/apparmor.d/cache': No such file or directory
.
starting DNS forwarder and DHCP server: dnsmasq... done.
Starting LXC autoboot containers:
Starting FUSE filesystem for LXC: lxcfs.
Starting internet superserver: xinetd.
mount namespace: 5
hierarchies:
0: fd: 6: name=systemd
1: fd: 7: pids
2: fd: 8: hugetlb
3: fd: 9: net_prio
4: fd: 10: perf_event
5: fd: 11: net_cls
6: fd: 12: freezer
7: fd: 13: devices
8: fd: 14: memory
9: fd: 15: blkio
10: fd: 16: cpuacct
11: fd: 17: cpu
12: fd: 18: cpuset
TIPC init...
starting iid_init....
starting shmcreat....
starting uwdtd....
starting fdpd...
EAL: Detected 4 lcore(s)
EAL: DPAA Bus Detected
EAL: rte_pci_scan(): opendir failed: No such file or directory
EAL: Scan for (pci) bus failed.
EAL: Probing VFIO support...
EAL: VFIO support initialized
PMD: net: dpaa: fm1-mac2: 92:2e:66:89:f2:c1
PMD: net: dpaa: fm1-mac4: 92:2e:66:89:f2:c3
PMD: net: dpaa: fm1-mac9: 92:2e:66:89:f2:c6
PMD: dpaa_sec-3 cryptodev init
PMD: dpaa_sec-4 cryptodev init
PMD: dpaa_sec-5 cryptodev init
PMD: dpaa_sec-6 cryptodev init
FDPAPI: port 0 name net_dpaa min_buf_size 512 max_rx_pktlen 10240 max_rxq 1 max_txq 32
FDPAPI: port 1 name net_dpaa min_buf_size 512 max_rx_pktlen 10240 max_rxq 1 max_txq 32
FDPAPI: port 2 name net_dpaa min_buf_size 512 max_rx_pktlen 10240 max_rxq 1 max_txq 32
FDPAPI: port 0 type 9 rxq 1 txq 2 mru 4022
FDPAPI: port 1 type 9 rxq 1 txq 2 mru 4022
FDPAPI: port 2 type 9 rxq 1 txq 2 mru 4022
FDPAPI: nb_mbuf 65536
USER1: fdp_frag_cache_table_create:allocate memory 4888960 (8192, 16, 10000) (128,384,384) start
USER1: fdp_frag_cache_table_create: allocated of 4888960 bytes at socket 0
USER1: fdp_ip_frag_table_create: allocated of 753920 bytes at socket 0
SPI: Open file /dev/spidev0.0
SPI: ChipID reg 0xcfa4
SPI: ChipID BCM53156 RevID 17
SPI unit 0: Dev 0xcfa4, Rev 0x11, Chip BCM53156_B0, Driver BCM53158_B0
0:soc_robo2_info_config: count of has_block: 51
SPI device BCM53156_B0 attached as unit 0.
waiting vEth0...KNI: pci: 00:00:00 00:00
KNI: pci: 00:00:00 00:00
KNI: pci: 00:00:00 00:00
KNI: pci: 00:00:00 00:00
SECD: RTE_MEMZONE get OK
SECD: NP bit=0x2 num=1, SP bit=0x0 num=0
SECD: DPAA_SEC cryptodev_count = 0
SECD: Allocated session pool on socket -1
SECD: cdev_id 0 is ENABLED
SECD: initialize_cryptodevs SECD: total cryptodev count = 4
DP: entering main loop on lcore 1
DP: -- lcoreid=1 portid=0 rxqueueid=0
DP: -- lcoreid=1 portid=1 rxqueueid=0
DP: -- lcoreid=1 portid=2 rxqueueid=0
FDPAPI: Configure network interface of 0 up
.
SECD: memzone init OK 82
starting rump_server....
Starting Authcnt Server daemon...OK
starting cmdlogd....
starting dishd....
Starting emd: [ OK ]
starting fanctrld....
Starting Internet Server daemon...OK
starting ledctrld....
Starting lpvrrpd...starting syslogd....
starting tasktrace....
starting klogd....
starting linktrapd....
starting lxclogd....
Starting IFD daemon: [ OK ]
starting lxcmngd....
starting restdbd....
starting restdbrd....
mcf_init: shmget size 15464076
* shared memory size = 15464076
$ cli initial Completed
starting configd...Jun 10 12:12:46 sshd[3733]: Could not load host key: SSH1-RSA key
Jun 10 12:12:46 sshd[3733]: Disabling SSH protocol version 1, Could not load host key
.
Starting ntpd: done
starting snmpd....
starting eventd....
starting mib2sad....
starting dwd....
No makedumpfile found.
starting lpmd....
starting lplbod....
starting bootstat ...
Jun 10 12:12:47 bootstat: Firmware started on power on
.
starting bfdd....
Starting NSM daemon: [ OK ]
Jun 10 12:12:48 nsm: %LINEPROTO-UPDOWN: Line protocol on Interface null0, changed state to up
Jun 10 12:12:48 nsm: %LINEPROTO-UPDOWN: Line protocol on Interface Loopback 0, changed state to up
Starting BGP daemon: [ OK ]
Starting OSPFv3 daemon: [ OK ]
Starting OSPFv2 daemon: [ OK ]
Starting OSPFv2 daemon 1: [ OK ]
Starting OSPFv2 daemon 2: [ OK ]
Starting OSPFv2 daemon 3: [ OK ]
Starting OSPFv2 daemon 4: [ OK ]
Starting OSPFv2 daemon 5: [ OK ]
Starting RIP daemon: [ OK ]
Starting SURVEY daemon: [ OK ]
Starting Router Advertisement daemon: [ OK ]
Starting LDP daemon: [ OK ]
starting prtd....
Starting RSVP daemon: [ OK ]
Starting fdpmonitor: [ OK ]
Starting isakmpd...Starting LSP-Ping daemon: [ OK ]
starting modemd...
starting pppoed....
Starting procmon: [ OK ]
starting mappd....
starting ngnd....
Starting nld....
starting dhcpcd....
starting dhcprd....
starting dhcpsd....
starting dnsclientd....
starting lbod....
Starting lppimd...Starting natd....
starting twampd....
Starting idsd....
Starting lacpd...Starting pimd....
starting sflowd....
starting sntpcd....
Starting vrrp6d...Starting vrrpd...starting pppd....
starting ddnscd....
Starting dnsd...
Starting usbifd...
starting liked....
starting lpd....
load hfddev.
starting hfdd....
Starting crond: OK
starting all-module-restart check ....
starting media_start....
F220 (console)
login: operator
<WARNING> weak login password: set the password
>
>
>enable
password:
<WARNING> weak enable password: set the password
#
#
#
#
#
#
#
#calendar set 16:18:00 22 sep 2025
Mon Sep 22 16:18:00 JST 2025
#
#
#
#show calendar
Mon Sep 22 16:18:11 JST 2025
#
#
#show version
--------------------- present-side ---------------------
F220 Version 01.06(00)[0]00.00.0 [2021/06/10 15:00]
---------------------- other-side ----------------------
F220 Version 01.06(00)[0]00.00.0 [2021/06/10 15:00]
#
#
#show environment
EQUIPMENT INFORMATION:
+---------+----------+----------------+--------------------------+
Name Serial Model Firm Ver/ROM Ver
+---------+----------+----------------+--------------------------+
F220 00017282 F220 01.06(00)[0]00.00.0
00073-gef30baf151
+---------+----------+----------------+--------------------------+
EQUIPMENT STATUS:
+---------+----------+-----------------+----------------+
Name Status Alarm/Severity Boot status
+---------+----------+-----------------+----------------+
F220 ready normal/none power on
+---------+----------+-----------------+----------------+
FAN1 normal normal/none
+---------+----------+-----------------+----------------+
TEMP SENSOR STATUS:
+-------+------------+-----------------+--------------------+-------------------+
Sensor Cu/Pk/Th Temp/Severity Last clearing of Pk Last recorded Pk
+-------+------------+-----------------+--------------------+-------------------+
TEMP1 42/ 42/ 64 normal/none Never 2025/09/22 16:18:29
TEMP2 34/ 34/ 56 normal/none Never 2025/09/22 16:17:29
TEMP3 48/ 48/ 99 normal/none Never 2025/09/22 16:17:49
+-------+------------+-----------------+--------------------+-------------------+
GbE PORT-MODULE STATUS:
+---------+--------+-----------------+------------------+-----+----------------+
Port Status Alarm/Severity Module type/name Rev Vendor PN/name
+---------+--------+-----------------+------------------+-----+----------------+
GbE 2/1 none normal/none
+---------+--------+-----------------+------------------+-----+----------------+
GbE PORT-MODULE SLOT STATUS:
+---------+----------+----------+-----------------+
Port Status Expected Slot/Severity
+---------+----------+----------+-----------------+
GbE 2/1 vacant none normal/none
+---------+----------+----------+-----------------+
USB DEVICE INFORMATION:
+---------+----------+---------------------------------------------------------+
Name Status Device name
+---------+----------+---------------------------------------------------------+
USB1 none
USB2 none
+---------+----------+---------------------------------------------------------+
USB SLOT STATUS:
+---------+----------+----------+-----------------+
Name Status Expected Slot/Severity
+---------+----------+----------+-----------------+
USB1 vacant none normal/none
USB2 vacant none normal/none
+---------+----------+----------+-----------------+
#
#
#show running.cfg
! LAST EDIT --:--:-- ----/--/--
! LAST REFRESH 12:12:45 2021/06/10 by system at boot
! LAST SAVE --:--:-- ----/--/--
!
ip scp server enable
ip sftp server enable
!
ip dhcp client-profile prof
retries infinity
exit
!
ip dhcp server-profile prof
address 192.168.1.2 192.168.1.254
exit
!
interface GigaEthernet 1/1
vlan-id 1
bridge-group 1
channel-group 1
exit
!
interface GigaEthernet 1/2
vlan-id 1
bridge-group 1
channel-group 1
exit
!
interface GigaEthernet 1/3
vlan-id 1
bridge-group 1
channel-group 1
exit
!
interface GigaEthernet 1/4
vlan-id 1
bridge-group 1
channel-group 1
exit
!
interface GigaEthernet 1/5
vlan-id 1
bridge-group 1
channel-group 1
exit
!
interface GigaEthernet 1/6
vlan-id 1
bridge-group 1
channel-group 1
exit
!
interface GigaEthernet 1/7
vlan-id 1
bridge-group 1
channel-group 1
exit
!
interface GigaEthernet 1/8
vlan-id 1
bridge-group 1
channel-group 1
exit
!
interface Port-channel 1
ip dhcp service server
ip dhcp server-profile prof
ip address 192.168.1.1 255.255.255.0
exit
!
interface Port-channel 2
ip dhcp service client
ip dhcp client-profile prof
exit
!
interface USB-Ethernet 1
channel-group 2
exit
!
end
#
#
#
;)
