[N896] ☆ Juniper Networks エンタープライズファイアウォール SRX300 ☆
[N896] ☆ Juniper Networks エンタープライズファイアウォール SRX300 ☆ 收藏
拍卖号：j1202547033
开始时间：10/17/2025 15:38:45
个 数：1
结束时间：10/22/2025 20:18:43
商品成色：二手
可否退货：可
提前结束：可
日本邮费：买家承担
自动延长：可
最高出价：
出价次数：0
| 出品商品 |
メーカー：Juniper Networks 商品名 / 型番 ：エンタープライズファイアウォール SRX300 付属品 ：ラックマウントキット（取付ネジはありません。）、ACアダプタ 程度 ：中古品になります。キズ・スリキズがあります。下部のゴムが欠損しております。 状態 ：通電～コンソール出力までの確認となります。 コンソール出力結果は次項を参照ください。 | |
| お取引について | 出品物は写真に写っている物のみです。 取り引きはノークレーム・ノーリターンでお願いします。 お使いのパソコンの使用状況によっては実物と色が異なる場合があります。 神経質な方は入札をお控え下さい。 | |
| お支払い金額 | お支払い金額は、落札金額＋消費税＋送料(税込)をお支払いください。 ※当店はオークションストアの為、落札金額に消費税が別途必要になります。 | |
| 発送方法 |
発送方法は、佐川急便の飛脚宅配便(元払い)か、クロネコヤマトの宅急便(元払い)になります。 送料(税込)は以下になります。 ・佐川急便 北海道 2200円 北東北・九州 1900円 南東北・中国・四国 1800円 関東・信越・北陸・中部・関西 1700円 ※沖縄・その他離島の場合の送料は入札の前にお問い合わせください。 ・クロネコヤマト 北海道 2400円 北東北・九州 2000円 南東北・中国・四国 1900円 関東・信越・北陸・中部・関西 1800円 沖縄 3800円 | |
| 発送について | 入金確認が出来ましたら2～3営業日後に発送します。 商品を発送しましたらご連絡致します。 | |
| コンソール |
SPI stage 1 bootloader (Build time: May 3 2016 - 23:48:30) early_board_init: Board type: SRX_300 U-Boot 2013.07-JNPR-3.1 (Build time: May 03 2016 - 23:48:31) SRX_300 board revision major:1, minor:8, serial #: CV5216AF0041 OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR) Base DRAM address used by u-boot: 0x10fc00000, size: 0x400000 DRAM: 4 GiB Clearing DRAM...... done Using default environment SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB Found valid SPI bootloader at offset: 0x90000, size: 1481840 bytes U-Boot 2013.07-JNPR-3.1 (Build time: May 03 2016 - 23:50:19) Using DRAM size from environment: 4096 MBytes checkboard siege SATA0: not available SATA1: not available SATA BIST STATUS = 0x0 SRX_300 board revision major:1, minor:8, serial #: CV5216AF0041 OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR) Base DRAM address used by u-boot: 0x10f000000, size: 0x1000000 DRAM: 4 GiB Clearing DRAM...... done SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB PCIe: Port 0 link active, 1 lanes, speed gen2 PCIe: Link timeout on port 1, probably the slot is empty PCIe: Port 2 not in PCIe mode, skipping Net: octeth0 Interface 0 has 1 ports (SGMII) Type the command 'usb start' to scan for USB storage devices. Boot Media: eUSB usb Found TPM SLB9660 TT 1.2 by Infineon TPM initialized Hit any key to stop autoboot: 5 4 3 2 1 0 SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB SF: 1048576 bytes @ 0x200000 Read: OK ## Starting application at 0x8f0000a0 ... Consoles: U-Boot console Found compatible API, ver. 3.1 USB1: Starting the controller USB XHCI 1.00 scanning bus 1 for devices... 2 USB Device(s) found USB0: Starting the controller USB XHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.8 (slt-builder@svl-ssd-build-vm06.juniper.net, Tue Feb 10 00:32:30 PST 2015) Memory: 4096MB SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB [0]Booting from eUSB slice 2 Loading /boot/defaults/loader.conf kernel data=0xba1734+0x152c64 syms=[0x4+0xa0930+0x4+0xf0607] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel] in 1 second... Booting [/kernel]... |/-\|/-\Kernel entry at 0x801000c0 ... init regular console Primary ICache: Sets 16 Size 128 Asso 39 Primary DCache: Sets 8 Size 128 Asso 32 Secondary DCache: Sets 1024 Size 128 Asso 4 CIU_FUSE 0x3/0x3 GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb kld_map_v: 0x8ff80000, kld_map_p: 0x0 Running in PARTITIONED TLB MODE Copyright (c) 1996-2018, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. JUNOS 15.1X49-D140.2 #0: 2018-05-25 17:54:15 UTC builder@monarth.juniper.net:/volume/build/junos/15.1/service/15.1X49-D140.2/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel can't re-use a leaf (debug)! JUNOS 15.1X49-D140.2 #0: 2018-05-25 17:54:15 UTC builder@monarth.juniper.net:/volume/build/junos/15.1/service/15.1X49-D140.2/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel real memory = 4294967296 (4194304K bytes) avail memory = 2621882368 (2500MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) Security policy loaded: Junos MAC/veriexec (mac_veriexec) Security policy loaded: JUNOS MAC/pcap (mac_pcap) MAC/veriexec fingerprint module loaded: SHA1 MAC/veriexec fingerprint module loaded: SHA256 netisr_init: !debug_mpsafenet, forcing maxthreads from 2 to 1 cpu0 on motherboard : CAVIUM's OCTEON 70XX/71XX CPU Rev. 0.2 with no FPU implemented L1 Cache: I size 78kb(128 line), D size 32kb(128 line), thirty two way. L2 Cache: Size 512kb, 4 way obio0 on motherboard uart0: on obio0 uart0: console (9600,n,8,1) twsi0 on obio0 set clock 0x31 xhci0: on obio0 usb0: on xhci0 usb0: USB revision 3.0 uhub0: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered xhci1: on obio0 usb1: on xhci1 usb1: USB revision 3.0 uhub1: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered cpld0 on obio0 pcib0: on obio0 Disabling Octeon big bar support pcib0: Initialized controller pci0: on pcib0 pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) gblmem0 on obio0 octpkt0: on obio0 cfi0: on obio0 cfi1: on obio0 umass0: ATP Electronics ATP CG eUSB, rev 2.00/11.00, addr 2 Timecounter "mips" frequency 1200000000 Hz quality 0 Registered AMT tunnel Encap with UDP Tunnel! Loading Redundant LT driver ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup da0 at umass-sim0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-4 device da0: 40.000MB/s transfers da0: 7672MB (15712256 512 byte sectors: 255H 63S/T 978C) Kernel thread "wkupdaemon" (pid 51) exited prematurely. Trying to mount root from ufs:/dev/da0s2a WARNING: / was not properly dismounted MFSINIT: Initialising MFSROOT WARNING: / was not properly dismounted Process-1 beginning MFSROOT initialization... Creating MFSROOT... /dev/md0: 20.0MB (40956 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 5.00MB, 320 blks, 640 inodes. super-block backups (for fsck -b #) at: 32, 10272, 20512, 30752 Populating MFSROOT... Creating symlinks... Setting up mounts... Continuing boot from MFSROOT... Attaching /cf/packages/junos via /dev/mdctl... Mounted junos package on /dev/md1... O WARNING: R/W mount of /cf/var denied. Filesystem is not clean - run fsck mount: /dev/bo0s3f : Operation not permitted ** /dev/bo0s3f ** Last Mounted on /cf/var ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts UNREF FILE I=117840 OWNER=0 MODE=100644 SIZE=0 MTIME=Oct 3 00:13 2025 CLEAR? yes ** Phase 5 - Check Cyl groups FREE BLK COUNT(S) WRONG IN SUPERBLK SALVAGE? yes SUMMARY INFORMATION BAD SALVAGE? yes BLK(S) MISSING IN BIT MAPS SALVAGE? yes 445 files, 32545 used, 1076668 free (244 frags, 134553 blocks, 0.0% fragmentation) ***** FILE SYSTEM MARKED CLEAN ***** ***** FILE SYSTEM WAS MODIFIED ***** Automatic reboot in progress... Verified jboot signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified junos signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified junos-15.1X49-D140.2-domestic signed by PackageProductionEc_2018 method ECDSA256+SHA256 Checking integrity of BSD labels: s1: No recovery data s2: No recovery data s3: No recovery data s4: No recovery data ** /dev/bo0s3e ** Last Mounted on /config ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 6 files, 6 used, 94770 free (34 frags, 11842 blocks, 0.0% fragmentation) ***** FILE SYSTEM MARKED CLEAN ***** ** /dev/bo0s3f FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 1076668 free (244 frags, 134553 blocks, 0.0% fragmentation) Checking integrity of licenses: Checking integrity of configuration: rescue.conf.gz: No recovery data LPC bus driver lpcbus0 on cpld0 tpm0: on lpcbus0 tpm: IFX SLB 9660 TT 1.2 rev 0x10 Loading configuration ... hw.re.gres_sync_other: 0 -> 1 mgd: Running FIPS Self-tests veriexec: no fingerprint for file='/sbin/kats/cannot-exec' fsid=76 fileid=2474188 gen=1 uid=0 pid=928 mgd: Time and ticks drifted too much, resetting synchronization... mgd: commit complete Setting initial options: . Starting optional daemons: usbd. Doing initial network setup: . Initial interface configuration: hw.re.gres_sync_other: 1 -> 0 additional daemons: eventd. Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/cryptosoft0: on motherboard IPsec: Initialized Security Association Processing. modules/ifpf kld kats kldkldload: can't load kats.ko: File exists . Doing additional network setup:. Starting final network daemons:. setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Initial rc.mips initialization:. Local package initialization:. starting local daemons:set cores for group access . kern.securelevel: -1 -> 1 Creating JAIL MFS partition... JAIL MFS partition created Boot media /dev/da0 has dual root support WARNING: JUNOS versions running on dual partitions are not same ** /dev/da0s1a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 1148332 free (44 frags, 143536 blocks, 0.0% fragmentation) chassis.ko loaded Loading JUNOS chassis module chassis_init_hw_chassis_startup_time: chassis startup time 0.000000 Fri Oct 3 00:19:57 UTC 2025 Amnesiac (ttyu0) login: Oct 3 00:21:09 init: exec_command: /usr/sbin/mountd (PID 1911) started Oct 3 00:21:09 init: mountd-service (PID 1911) started Oct 3 00:21:09 init: gstatd (PID 1908) exited with status=1 Oct 3 00:21:09 init: exec_command: /usr/sbin/gstatd (PID 1914) started Oct 3 00:21:09 init: gstatd (PID 1914) started Oct 3 00:21:15 init: forwarding (PID 1807) terminated by signal number 2! Oct 3 00:21:15 init: exec_command: /usr/sbin/fwdd (PID 1921) started Oct 3 00:21:15 init: forwarding (PID 1921) started Oct 3 00:21:17 init: mountd-service (PID 1911) exited with status=1 Oct 3 00:21:17 init: exec_command: /usr/sbin/mountd (PID 1922) started Oct 3 00:21:17 init: mountd-service (PID 1922) started Oct 3 00:21:17 init: gstatd (PID 1914) exited with status=1 Oct 3 00:21:17 init: exec_command: /usr/sbin/gstatd (PID 1923) started Oct 3 00:21:17 init: gstatd (PID 1923) started Amnesiac (ttyu0) login: root --- JUNOS 15.1X49-D140.2 built 2018-05-25 17:54:15 UTC root@% cli root> configure Message from syslogd@ at Oct 3 00:21:43 ... SCHED: Thread 4 (Module Init) ran for 1654 ms without yielding Message from syslogd@ at Oct 3 00:21:43 ... Scheduler Oinker Message from syslogd@ at Oct 3 00:21:43 ... Frame 00: sp = 0x50e7e478, pc = 0x1823ae58 Message from syslogd@ at Oct 3 00:21:43 ... Frame 01: sp = 0x50e7e520, pc = 0x18222b54 Message from syslogd@ at Oct 3 00:21:43 ... Frame 02: sp = 0x50e7e590, pc = 0x187a5a40 Message from syslogd@ at Oct 3 00:21:43 ... Frame 03: sp = 0x50e7e5e0, pc = 0x1850b08c Message from syslogd@ at Oct 3 00:21:43 ... Frame 04: sp = 0x50e7e660, pc = 0x1a832004 Message from syslogd@ at Oct 3 00:21:43 ... Frame 05: sp = 0x50e7e700, pc = 0x187c9864 Message from syslogd@ at Oct 3 00:21:43 ... Frame 06: sp = 0x50e7e748, pc = 0x1a6b0dec Message from syslogd@ at Oct 3 00:21:43 ... Frame 07: sp = 0x50e7f388, pc = 0x187c9650 Message from syslogd@ at Oct 3 00:21:43 ... Frame 08: sp = 0x50e7f3a0, pc = 0x187c9a20 Message from syslogd@ at Oct 3 00:21:43 ... Frame 09: sp = 0x50e7f3b8, pc = 0x1821dc9c Message from syslogd@ at Oct 3 00:21:43 ... Frame 10: sp = 0x50e7f3f0, pc = 0x1823a41c Message from syslogd@ at Oct 3 00:21:43 ... Frame 11: sp = 0x50e7f418, pc = 0x00012060 Entering configuration mode [edit] root# show system autoinstallation { traceoptions { level verbose; flag { all; } } interfaces { ge-0/0/0 { bootp; } ge-0/0/7 { bootp; } } } name-server { 8.8.8.8; 8.8.4.4; } services { ssh; netconf { ssh; } dhcp-local-server { group jdhcp-group { interface irb.0; } } web-management { https { system-generated-certificate; } } } syslog { archive size 100k files 3; user * { any emergency; } file messages { any notice; authorization info; } file interactive-commands { interactive-commands any; } } max-configurations-on-flash 5; max-configuration-rollbacks 5; license { autoupdate { url https://ae1.juniper.net/junos/key_retrieval; } } phone-home { server https://redirect.juniper.net; rfc-complaint; } ## Warning: missing mandatory statement(s): 'root-authentication' [edit] root# show interfaces ge-0/0/0 { unit 0 { family inet; } } ge-0/0/1 { unit 0 { family ethernet-switching { vlan { members vlan-trust; } } } } ge-0/0/2 { unit 0 { family ethernet-switching { vlan { members vlan-trust; } } } } ge-0/0/3 { unit 0 { family ethernet-switching { vlan { members vlan-trust; } } } } ge-0/0/4 { unit 0 { family ethernet-switching { vlan { members vlan-trust; } } } } ge-0/0/5 { unit 0 { family ethernet-switching { vlan { members vlan-trust; } } } } ge-0/0/6 { unit 0 { family ethernet-switching { vlan { members vlan-trust; } } } } ge-0/0/7 { unit 0 { family inet; } } irb { unit 0 { family inet { address 192.168.1.1/24; } } } [edit] root# | |
| 出价者 | 信用 | 价格 | 时间 |
|---|
推荐
;)
