/===================================================/
        PMON Version 2.0.1
        [Length=0x3a968 CRC=0xe6177528]
        Copyright 2006
/===================================================/
64MB Detected

Ethernet Failover Mode Disabled
Serial Number = WAC050****
MAC Address 1= 00:0D:5D:06:**:**
Kernel Image Length = 0x691000, CRC = 0x1638a1d3
-
CRC Check passed
Image Started At Address 0xbf000000.
Image Length = 6885376 (0x691000).
/
CRC Check passed
Image Started At Address 0x80020000.
Image Length = 6885376 (0x691000).
boot: root=/dev/mtdblock1 console=ttySC1,9600
CPU revision is: 00002242
Primary instruction cache 8kb, linesize 16 bytes
Primary data cache 4kb, linesize 16 bytes
Linux version 2.4.12 (builder@sxlinux) 
(gcc version 2.95.3 19991030 (prerelease)) #444 Mon Mar 23 12:11:31 EST 2009
TX3927 -- CRIR:39270040 CCFG:0006303b PCFG:0ffc700d
TX3927 PCIC -- DID:000a VID:102f RID:07 Arbiter:Internal
TJSYS JMR-TX3927 (Rev 3) --- IOC(Rev 3) DIPSW:0,1,0,0
TX39XX D-Cache WriteThrough.
Determined physical RAM map:
memory: 03ffffe8 @ 00000000 (usable)
setup.c -> init ramdisk
InitRD start - -2144972800 end --2140469983Initial ramdisk 
at: 0x80265000 (4502817 bytes)
On node 0 totalpages: 16383
zone(0): 4096 pages.
zone(1): 12287 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock1 console=ttySC1,9600
rtc_ds1742_get_time:year=25,mon=11,day=10,hour=2,min=27,sec=20,century=20
Calibrating delay loop... 132.30 BogoMIPS
Memory: 57556k/65532k available 
(1933k kernel code, 7976k reserved, 4559k data, 224k init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...  available.
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
pci.c mips_io_port_base is 0xB5000000
PCI: IO 0x00000000-0x00ffffff MEM 0x08000000-0x0fffffff
Scanning bus 00
Found 00:68 [10ec/8139] 000200 00
Found 00:98 [13a8/0158] 000700 00
Fixups for bus 00
Bus scan for 00 returning with max=00
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
Exar's Serial Driver for the PCI Family of UARTs version 3.30 (2004-09-29) 
with SHARE_IRQ SERIAL_PCI enabled
Serial driver version 5.05c (2001-07-08) 
with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
TXx927 Serial driver version 0.20
ttySC00 at 0xfffef300 (irq = 22) is a TXx927 SIO
ttySC01 at 0xfffef400 (irq = 23) is a TXx927 SIO
request_module[parport_lowlevel]: Root fs not mounted
lp: driver loaded but no devices found
MIPS Generic Real Time Clock Driver v0.1
block: 128 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
PPP generic driver version 2.4.1
toshiba_tx: ioremap is bf000000
toshiba_tx: ioremap is be000000
Number of erase regions: 1
Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)
Primary Algorithm Table at 0040
Alternative Vendor Command Set: 0000 (None)
No Alternate Algorithm Table
Vcc Minimum: 2.7 V
Vcc Maximum: 3.6 V
No Vpp line
Typical byte/word write timeout: 128 オs
Maximum byte/word write timeout: 1024 オs
Typical full buffer write timeout: 128 オs
Maximum full buffer write timeout: 4096 オs
Typical block erase timeout: 1024 オs
Maximum block erase timeout: 16384 オs
Chip erase not supported
Device size: 0x800000 bytes (8 MiB)
Flash Device Interface description: 0x0001
  - x16-only asynchronous interface
Max. bytes in buffer write: 0x20
Number of Erase Block Regions: 1
  Erase Region #0: BlockSize 0x10000 bytes, 128 blocks
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of JEDEC chips: 1
phymap 0 cfi_probe: mymtd is 83fce090
toshiba_tx flash device(Flash-1): 1000000 at 1f000000
Creating 0 MTD partitions on "Flash-1":
Number of erase regions: 1
Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)
Primary Algorithm Table at 0040
Alternative Vendor Command Set: 0000 (None)
No Alternate Algorithm Table
Vcc Minimum: 2.7 V
Vcc Maximum: 3.6 V
No Vpp line
Typical byte/word write timeout: 128 オs
Maximum byte/word write timeout: 1024 オs
Typical full buffer write timeout: 128 オs
Maximum full buffer write timeout: 4096 オs
Typical block erase timeout: 1024 オs
Maximum block erase timeout: 16384 オs
Chip erase not supported
Device size: 0x800000 bytes (8 MiB)
Flash Device Interface description: 0x0001
  - x16-only asynchronous interface
Max. bytes in buffer write: 0x20
Number of Erase Block Regions: 1
  Erase Region #0: BlockSize 0x10000 bytes, 128 blocks
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of JEDEC chips: 1
phymap 1 cfi_probe: mymtd is 83fce190
toshiba_tx flash device(Flash-2): 1000000 at 1e000000
Creating 0 MTD partitions on "Flash-2":
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
ip_conntrack (511 buckets, 4088 max)
ip_tables: (c)2000 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
rd_load_image()
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 4397k freed
VFS: Mounted root (ext2 filesystem).
Algorithmics/MIPS FPU Emulator v1.5
Register /dev/phyctrl succeeded
8139too Fast Ethernet driver 0.9.19
setMacAddr 1 set etheraddr
EthernetAddr: [     00:0d:5d:06:1f:63]
eth0: RealTek RTL8139 Fast Ethernet at 0xa8001000, 00:0d:5d:06:**:**, IRQ 19
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.

Please wait for the SX server to start.....
Username: admin
Password:
Authentication successful.
System is in reset state.
Please enter new administrator password.
New Password:
Verify New Password:

Setting password...
User admin : Password Saved
--------------------------------------------------------------------------------
Welcome to the DominionSX.  [Model: SX4]
UnitName:DominionSX         FirmwareVersion:3.1.7.5.5      Serial:WAC050****
IP Address:192.168.0.192    UserIdletimeout:10min
--------------------------------------------------------------------------------

Port Port                          Port Port
No.  Name                          No.  Name
1  - Port1 [U]                     2  - Port2 [U]
3  - Port3 [U]                     4  - Port4 [U]

Current Time: Mon Nov 10 02:31:30 2025

admin > show version

Version Information :
Firmware Version : 3.1.7.5.5
Kernel Version : 2.4.13
PMON Version: 2.0.1
RSC Version: 3.0.0.5.37
admin > show all

Dominion SX4 [64Mb]     Serial: WAC050****
Current time: 2025-11-10 02:32:50
Power Supply 1: Good
Power Supply 2: Failed
Supporting software:
        OpenSSH_4.3p2, OpenSSL 0.9.7m 23 Feb 2007
        HTTP Server version: Apache/2.2.8 (Unix)
        HTTP Server built:   Jan 19 2008 08:31:17
        TELNET Linux NetKit 0.17
-----------------------------------------------------------
Date /Time Settings:
        Date : 2025-11-10 02:32:51
        Timezone : 13
Version Information :
Firmware Version : 3.1.7.5.5
Kernel Version : 2.4.13
PMON Version: 2.0.1
RSC Version: 3.0.0.5.37
Overall Upgrade History:
3.1.7.5.5           Tue Sep  7 18:58:57 2010

Network Settings
        Name: DominionSX
        Domain:
        CSC Port: 5000
        Discover Port: 5000
        Ethernet Interface: lan1
                MAC: 00:0d:5d:06:**:**
                DHCP Client: true
                IP: 192.168.0.192
                Net Mask: 255.255.255.0
                Gateway: 192.168.0.192
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.0.0     *               255.255.255.0   U     0      0        0 eth0
default         192.168.0.192   0.0.0.0         UG    0      0        0 eth0
Firewall Enabled: false
Chain INPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     0    --  localhost            anywhere

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
IPForwarding Enabled: true
Modem Settings
        Dialin Enabled: false
        Access Mode: All
        Server Address: 10.0.0.1
        Client Address: 10.0.0.2
        Dialback: false
DPA Mode: Normal
Port Access Mode: share
        Permitted users may access an already occupied port.
Unauthorized Port Access Settings :
        Enable : 0
Port number 1:
        Name: Port1
        BPS: 9600
        Parity: 0
        Flow control: 0
        RSC Terminal Emulation: VT100
        Disconnect: Disabled
        Application: RaritanConsole
        Exit String:
        Escape: Control-]
        Sendbreak Duration : 300 ms
        DPA:
                IP: 0.0.0.0
                Telnet Port: 0
                SSH Port: 0
        Always Active: False
        Messages suppressed: none

【中略】

Port number 4:
        Name: Port4
        BPS: 9600
        Parity: 0
        Flow control: 0
        RSC Terminal Emulation: VT100
        Disconnect: Disabled
        Application: RaritanConsole
        Exit String:
        Escape: Control-]
        Sendbreak Duration : 300 ms
        DPA:
                IP: 0.0.0.0
                Telnet Port: 0
                SSH Port: 0
        Always Active: False
        Messages suppressed: none
Idle Timeout Settings :
        Enable : true
        Timeout : 10 min
User Settings:
        Login : admin
        Name : Administrator
        Info : Default admin user.
        Dialback :
        Group :Admin
        Active : 1
--------
Group Settings
        Name: Admin
        Class: Admin
        Port Sharing: true
        Ports: 1 2 3 4
        Power: 1 2 3 4
--------
LPA Settings
        Enable: true
        BPS: 9600
SSH Settings
        Enable: true
        Port: 22
Telnet Settings
        Enable: false
        Port: 23
Http Settings:
        Enabled : true
        Port : 80
        HTTPS Redirection: true
Https Settings:
        Enabled : true
        Port : 443
Encryption Type Settings:
        Encrypted Protocol  : ssl
Client Certificate Settings:
        Enabled : false
NTP Settings :
        Enable : 0
        Primary IP : 0.0.0.0
        Secondary IP : 0.0.0.0
Keyword list
No Keywords Configured.
SMTP Settings:
        Server IP: 0.0.0.0
        Enabled: false
SNMP Settings:
        Enable :false
        Community :public
Destinations :
EventLogFile Settings
        Enable: false
        Destination: Local
        Style: wrap
        Size: 65535
Syslog Settings
        Enable : false
        Primary IP Address - 0.0.0.0
        Secondary IP Address - 0.0.0.0
NFS Settings
        Enable: false
        Primary IP: 0.0.0.0
        Pimary Directory:  /export/domSX/
        Secondary IP: 0.0.0.0
        Secondary Directory:  /export/domSXLog/
Portlog Settings:
        Enable: false
        File Prefix: domSX-NFS
        File Size: 65535
        UpdateFrequency: 20
        TimestampFrequency: 20
        Input Log Enable: false
        Input Log Directory: input
        Output Log Directory: output
        Encrypted: false
        Block on Failure: true
LDAP Server Settings
----------------------------------------
Primary Server
        Enabled - false
        IP Address - 0.0.0.0
        Port - 389
        Secret -
        Base DN -
        Base Search -
        Auth Query String -
        Dialback Query String -
Secondary Server
        Enabled - false
        IP Address - 0.0.0.0
        Port - 389
        Secret -
        Base DN -
        Base Search -
        Auth Query String -
        Dialback Query String -
RADIUS Server Settings
----------------------------------------
Primary Server
        Enabled - false
        IP Address - 0.0.0.0
        Port - 1812
        Secret -
Secondary Server
        Enabled - false
        IP Address - 0.0.0.0
        Port - 1812
        Secret -
TACACS Server Settings
----------------------------------------
Primary Server
        Enabled - false
        IP Address - 0.0.0.0
        Port - 49
        Secret -
Secondary Server
        Enabled - false
        IP Address - 0.0.0.0
        Port - 49
        Secret -
Kerberos Enabled: false
Security Profile Settings:
        Enable: 0
StrongPassword Settings:
        StrongPasswordRulesEnable : false
        PWUppercaseRequired : true
         PWLowercaseRequired : true
         PWNumberRequired : true
         PWSymbolRequired : true
         PasswordValidityPeriod : 60 Days
         PasswordHistoryDepth : 5
         MinPasswordLength : 8
         MaxPasswordLength : 15
LocalAuthentication Settings:
         Account gets expired if inactive for  : 330 days
LocalAuthentication Settings:
         Number of Retries allowed before a lockout/AccountDeactivation : 3
LocalAuthentication Settings:
         Account gets locked out for : 5 minutes
LocalAuthentication Settings:
        LocalAuthentication Enable status : true
Single Login per User Settings
        Enabled : false
Power Delay Settings :
        Sequence Delay: 2
        Cycle Delay: 10
No power strips configured.
No Power Groups configured.
admin >