Kingston製M2 SATA 256GB SSDになります。
機材整理のため出品します。
Windows機でM2 SATA SSDを読める環境がないのでLinuxでS.M.A.R.T.情報を取得したところ SMART overall-health self-assessment test result: PASSED との結果でした。
smartctl コマンドの出力結果は次の通りです。
---
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.73+deb13-amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Phison Driven SSDs
Device Model: KINGSTON OM8P0S3256B-A0
Serial Number:
LU WWN Device Id: 5 0026b7 6855bd5e9
Firmware Version: SBFK62A3
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Apr 25 12:40:30 2026 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (65535) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 20087
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 70
167 Write_Protect_Mode 0x0000 100 100 000 Old_age Offline - 0
168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 24 (Average 12)
181 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 49
194 Temperature_Celsius 0x0022 049 063 000 Old_age Always - 49 (Min/Max 15/63)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
218 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
231 SSD_Life_Left 0x0000 099 099 000 Old_age Offline - 99
233 Flash_Writes_GiB 0x0032 100 100 000 Old_age Always - 2002
241 Lifetime_Writes_GiB 0x0032 100 100 000 Old_age Always - 2484
242 Lifetime_Reads_GiB 0x0032 100 100 000 Old_age Always - 387
244 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 12
245 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 24
246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 181144
SMART Error Log not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
The above only provides legacy SMART information - try 'smartctl -x' for more
mercari代购
;){kind=link}